2K screwdriver VDE. Quality blades made of high-alloy, hardened special steels. Blackened blades with directly sprayed, conical blade insulation. 2-component punched stitching in the signal colour red-yellow. With hanging hole. Material: molybdenum-vanadium / chromium silicon-vanadium / chromium vanadium. Surface: Insulated according to IEC 60900:2004.
2K screwdriver VDE. Classic workshop screwdriver for Phillips Recess screws. With 2-component handle and hard quick turn and soft power zone. With hanging hole. Standards: DIN ISO 8764 / tip according to DIN ISO 8764-1 PH. Material blade: chrome vanadium. Surface: Insulated according to IEC 60900:2004.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
Cable knife, protective cap, VDE. With straight, hardened blade. Stainless steel blade. With protective cap. 10,000 V piece tested. Surface: Insulated according to IEC 60900:2004.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
MATADOR VDE tools. Security first. Electrician scissors VDE. Effortlessly cuts cables, cable sheaths, cable ties, insulating tape or even wire. Made of stainless steel. With notch for cables and wires. Material: INOX steelHardness: 60 HRC.
Version:
With torque wrench 12,5 mm - 1/2" (20-100 Nm)
MATADOR VDE tools. Safety first. The "Automotive" electrician tool kit is a sensibly assembled tool set with isolated tools for live work on hybrid and electric vehicles. The high-quality insulated tools are safely housed in the robust and practical hard case and are thus protected from damage. The tool kit contains the most important insulated tools to carry out service and repair work on modern hybrid and electric vehicles. All constantly required tools such as creaks and sockets, as well as pliers and screwdrivers are of course included. Also included are insulated spanners and an adjustable roller wrench, as well as insulated T-handle angle screwdrivers. The set is optionally available with or without VDE torque wrench in 12.5 mm (1/2") 20 – 100 NM.
Extension VDE, 12.5 mm (1/2") 125 mm, with ball lock. For manual operation with ratchet and connecting parts. Square according to DIN 3120, A 12.5 and C 12.5
/ ISO 1174 and 10,000 V piece tested. Isolated according to IEC 60900:2004.
Extension VDE, 12.5 mm (1/2") 250 mm, with ball lock. For manual operation with ratchet and connecting parts. Square according to DIN 3120, A 12.5 and C 12.5
/ ISO 1174 and 10,000 V piece tested. Isolated according to IEC 60900:2004.
Hex socket wrench VDE. Ergonomic stitching shape for fatigue-free work and transmission of larger torques. Insulation according to IEC 60900:2004. 10,000 V piece tested. Standards: DIN / ISO 7445.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
Angle screwdriver, short, insulated. Insulated angle screwdriver for live work. Up to 1000V, piece tested according to EN 60900/IEC 60900. With 2-layer safety dip insulation consisting of red insulation layer and yellow contrast layer for quick identification of damage.
For hexagon socket screws. Long shape, hardened throughout. Special chromium vanadium alloy for transmitting high torque values.
MATADOR pliers XL, 4 pcs, VDE. Safety first. VDE range of pliers, 4 pieces, set in practical, transparent polypropylene box: Sturdy packaging, stackable and storable, resealable, reusable, with hanging hole for tool panels. Contents: combination pliers (180mm), side cutter (180mm), flat round pliers straight/angled (205mm), water pump pliers (240mm).
Combination pliers:The MATADOR Kraft Pliers VDE. For cutting hard and soft wires. Cutting additionally inductively hardened. Gripping zones for flat and round material. With nail & wire holder. Integrated ring wrench. Power industry with optimal lever ratio for easy and low-fatigue work. With ergonomically shaped 2-component handle.
Side cutter:The MATADOR side cutter VDE. For cutting hard and soft wires. Precision cutting for the finest wires. Cutting additionally inductively hardened. Cutting hardness approx. 62 HRC. Power industry with optimal lever ratio for easy and low-fatigue work. With ergonomically shaped 2-component handle.
Flat round pliers:Telephone pliers, straight VDE. For holding, gripping, bending and cutting work. For cutting hard and soft wires. With cutting edge and burner hole. Cutting additionally inductively hardened. Gripping surfaces toothed. With long, flat-round jaws. Integrated ring wrench. With ergonomically shaped 2-component handle. Maximum safety thanks to slip protection.
Water pump pliers:Water pump pliers VDE. Form C. With safety joint plugged through. Safety pinch protection at every setting. Optimal pivot point, low effort. Drop forged and oil-hardened.
Changeover ratchet VDE, 12.5 mm (1/2"). Standard with snap lock and 32 teeth for high torque values. Including ergonomic handle For manual operation with ratchet and connecting parts. Isolated according to IEC 60900:2004 and with the standards DIN 3122 / ISO 3315. 10,000 V piece tested.
MATADOR VDE tools. Safety first. The MATADOR side cutter VDE. For cutting hard and soft wires. Precision cutting for the finest wires. Cutting additionally inductively hardened. Cutting hardness approx. 62 HRC. Power industry with optimal lever ratio for easy and low-fatigue work. With ergonomically shaped 2-component handle. Standards: DIN / ISO 5749. Material: special tool steel. Surface: Insulated according to IEC 60900:2004.
Wrench insert long VDE, 12.5 mm (1/2"), 14 mm. Suitable for metric and inch nuts. Isolated according to IEC 60900:2004 and 10,000 V piece tested.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
Wrench insert VDE, 12.5 mm (1/2"), 19 mm. Suitable for metric and inch nuts. Isolated according to IEC 60900:2004 and 10,000 V piece tested.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
MATADOR VDE tools. Safety first. Telephone pliers, straight VDE. For holding, gripping, bending and cutting work. For cutting hard and soft wires. With cutting edge and burner hole. Cutting additionally inductively hardened. Gripping surfaces toothed. With long, flat-round jaws. Integrated ring wrench. With ergonomically shaped 2-component handle. Maximum safety thanks to slip protection. Standards: DIN / ISO 5745. Material: C-45 quenched and tempered steel. Surface: Insulated according to IEC 60900:2004.
Tweezers, straight, VDE. 10,000 V piece tested. With 2-layer safety dip insulation. Material: special steel, nickel-plated. Surface: Insulated according to IEC 60900:2004.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
Universal control cabinet key with all important profiles for control cabinets, shut-off systems for gas, water and electricity supply and technical installations in buildings such as air conditioning and ventilation systems, shut-off valves, mains switchboards, etc.
Additionally with plastic adapter with ball chain, reversible bit 6.3 mm (1/4") with slot 1.0x7 mm and cross slot PH2, total arm length 76 mm, additional square 5 mm. Material: die-cast zinc (GD-Zn).
Cable cutter VDE. For crush-free stripping and cutting of copper and aluminium cables up to Ø 16 mm (50 mm²). Adjustable screw joint. Material: C-45 quenched and tempered steel. Surface: Insulated according to IEC 60900:2004.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
Cable cutters VDE. Screwed trade for readjustment. Insulation according to IEC 60900:2004. 10,000 V piece tested. With 2-layer safety dip insulation. For copper and aluminium cables. Material: Forged special steel. Surface: Insulated according to IEC 60900:2004.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
Langbeck round pliers in insulated design for all work under tension. Particularly suitable for all gripping and bending work. Up to 1000V, piece tested according to EN 60900/IEC 60900 and VDE certified. Toothed gripping surfaces. With long, round cheeks. With newly developed handle cover with three different grip zones for fatigue-free work in a strong design with numerous functions. Maximum safety thanks to slip protection. According to DIN / ISO 5745.
MATADOR is one of the pioneers of the tool industry. Since 1900 we have been producing quality hand tools "around the screw". We stand for sophisticated premium tools. Reliable, design-oriented, no frills.
For people who know what they want. They are in the arena and not in the auditorium. Being able to distinguish tools from toys. Who believe in themselves.
Welcome to the Arena! Be a MATADOR.
Insulated open-ended spanner for live working. Up to 1000V, piece-tested according to EN 60900/IEC 60900 and VDE certified. With 2-layer safety dip insulation consisting of red insulation layer and yellow contrast layer for quick identification of damage.
For tightening and loosening nuts and screws, optimum fitting accuracy and longer service life of screw and spanner thanks to extremely precisely machined jaws. With 15° jaw position for comfortable working. Made of high-quality chrome vanadium steel (31CrV3).
MATADOR VDE tools. Safety first. The practical set with the most important pliers: combination pliers 180 mm, force side cutters 180 mm and telephone pliers with straight/angled jaws 205 mm.The new MATADOR-VDE pliers with yellow, soft and non-slip grip zone made of TPE plastic ensure a secure hold with maximum pressure. Safety is increased by an optimized slip protection .
Combination pliers: For gripping, cutting and holding. Cuts hard and soft wires. Cutting additionally inductively hardened. Asymmetrical gripping surfaces for better grip on the workpiece. Gripping zones for flat and round material. With nail & wire holder and integrated ring wrench. Optimum lever ratio for easy and low-fatigue work. Side cutter: For cutting hard and soft wires. Precision cutting for the finest wires. Cutting additionally inductively hardened. Cutting hardness approx. 62 HRC. Power industry with optimal lever ratio for easy and low-fatigue work. ISO 5749.
Flat round pliers: For holding, gripping, bending and cutting work. For cutting hard and soft wires. With cutting edge and burner hole. Cutting additionally inductively hardened. Toothed gripping surfaces. With long, flat-round jaws. Integrated ring wrench. DIN / ISO 5745.
